- Clarke Parts & Equipment Sales Inc.
- (705) 799-0505
- info@clarkessoutherntruckparts.com
our products
Atlas® Garage Pro 8000 EXT Portable Hobbyist 8,000 Lbs. Capacity 4 Post Lift (EXTRA TALL)
May 28, 2021
Atlas Garage Pro 9000 Portable Heavy Duty 9000 Lb Capacity 4 Post Lift
May 28, 2021
Atlas® Garage Pro 8000 EXT-L Portable 8,000 Lbs. Capacity 4 Post Lift (EXTRA TALL, EXTRA LONG)
$4,995.00
- 2 Year Structural/1 Year Hydraulic Limited Warranty
- Includes Caster Kit With Polyurethane Caster Wheels
- Single Point Lock Release
- CE Tested And Approved
- Double Lock Safety System
- Garage Pro 8000 EXT-L Installation
- Includes Approach Ramps
- Includes Drip Trays
- Includes Heavy Duty Jack Tray
- Includes Rubber Wheel Chocks
- Includes Wheel Stops
- Lock Ladder Column Design
Atlas® Garage Pro 8,000 EXT-L (extra long and slightly wider) Service/Storage Lift. This lift is 20 inches longer (wheelbase) and 3 inches wider than the Atlas® Garage Pro 8000 EXT. Or to compare to the original, this lift is 20 inches longer (wheelbase), 3 inches wider, and 14 inches taller than the Atlas® Garage Pro 8000! The extra runway length will accommodate almost all of the longer wheelbase pickup trucks, except duallys. This is because the dual rear wheels are TOO WIDE to fit between the column lock assemblies. Check out the Atlas® Garage Pro 9000 or the Atlas® 409-HP if you need a portable lift for your dually!
The portable Atlas® Garage Pro 8000 EXT-L includes a caster kit with polyurethane wheels. The caster kit can be installed or removed in just a matter of minutes and requires no tools.
All Atlas® portable four post lifts (8,000 lb. capacity) are designed and built for use by Mr. Homeowner or restoration shops. These lifts are not designed to work in commercial repair shops that raise and lower a lift several times per day. If you have questions about which Atlas® lift will best suit your application, please ask your salesperson.
Specifications
| Atlas® Garage Pro 8000 EXT-L Specifications | |
| Capacity | 8,000 LB |
| Lifting Height | 84 ½” (7′ ½”) |
| Overall Width (Without Motor) | 108″ (9′) |
| Overall Width (With Motor) | 116 ½” (9′ 8 ½”) |
| Length Between Columns | 176 ½” (14′ 8 ½”) |
| Overall Length with Approach Ramps | 227″ (18′ 11″) |
| Overall Length without Approach Ramps | 195″ (16′ 3″) |
| Approach Ramps | 36 3/4″ (3′ 3/4″) x 19 5/8″ (1′ 7 5/8″) |
| Total Runway Width | 22″ (1′ 10″) |
| Runway Length | 185″ (15′ 5″) |
| Runway Thickness | 4 ½” |
| Width Between Runways | 38″ (3′ 2″) |
| Width Between Runway Rails | 34″ (2′ 10″) |
| Outside Runway to Outside Runway | 77 3/4″ (6′ 5 3/4″) |
| Clearance Under Runways | Max: 80″ (6′ 8″) |
| Size of Column | 6 ¼” x 3 3/8″ |
| Clearance Between Columns | 98″ (8′ 2″) |
| Base of Column | 9 5/8″ x 11 ½” |
| Height of Columns | 97 ½” (8′ 1 ½”); 100″ (8′ 4″) with Bolts |
| Maximum Wheel Base | 173″ (14′ 5″) |
| Drive Thru (Outside of tire to outside of tire) | 84″ (7′) |
| Cable Diameter | .350″ |
| Gauge Of Steel | 6 Gauge (.1875″/ 3/16″ / 4.75mm) |
| Motor | 110 Volt. A 30 amp breaker is required. |
| Oil Requirement | 3-5 Gallons AW32/AW46 |
| Shipping Weight | 1,900 LB. |
|
11 Locking Positions |
11 Locking Positions |
| (+/ – 2″) | (+/ – 2″) |
| 19″ (1′ 7″) | 24 1/4″ (2′ 1/4″) |
| 25″ (2′ 1″) | 30 1/4″ (2′ 6 1/4″) |
| 31″ (2′ 7″) | 36 1/4″ (3′ 1/4″) |
| 37″ (3′ 1″) | 42 1/4″ (3′ 6 1/4″) |
| 43″ (3′ 7″) | 48 1/4″ (4′ 1/4″) |
| 49″ (4′ 1″) | 54 1/4″ (4′ 6 1/4″) |
| 55″ (4′ 7″) | 60 1/4″ (5′ 1/4″) |
| 61″ (5′ 1″) | 66 1/4″ (5′ 6 1/4″) |
| 67″ (5′ 7″) | 72 1/4″ (6′ 0 1/4″) |
| 73″ (6′ 1″) | 78 1/4″ (6′ 6 1/4″) |
| 79″ (6′ 7″) | 84 1/4″ (7′ 1/4″) |
